What are the reasons why stretch film is prone to breakage

The commonly used stretch film is mainly used for packaging, and some customers may encounter the problem of excessive tension leading to breakage during use. But in reality, it is not caused by quality issues, many factors may contribute to this situation. Next, we will analyze in detail the reasons for easy breakage.
1. Excessive pulling force.
After sterilization, cooling treatment was not carried out in a timely manner.
3. Failure to use in a sterile environment leads to the problem of easy breakage.
4. Accidentally scratching the protective film with the blade while unpacking. Usually, cardboard boxes or cardboard packaging are used for easy transportation during shipment. However, if you are not careful during unloading and storage, or if you apply too much force when opening the box, or if the cutting edge is too deep, it may scratch the edge of the film and cause it to crack when stretched.
5. When packaging pallets, it is sometimes easy to break, which is a problem that needs to be noted. The correct usage method is to stretch the packaging film appropriately when approaching the corner, and then pass through the corner, rather than pulling hard after passing the corner. Due to the ease of puncturing the packaging film at corners, especially at high speeds, even thicker packaging films may be punctured.

6. Pay attention to correct storage and ensure that the placement meets the requirements.
7. The chain clamp is damaged during the production of stretch film.
Normally, hot filling needs to be carried out at 100 degrees Celsius, but stretching deformation may also occur during this operation.
If the box is damaged, it will cause wear on its edges, which can easily lead to breakage during use.
Through the above content, we understand the reasons why stretch films are prone to breakage. It is important to be careful when using them, choose the correct method, and protect this product in a timely manner.